U-Boot > U-Boot > run nd.boot SW ECC selected NAND read: device 0 offset 0x200000, size 0x280000 2621440 bytes read: OK ## Booting kernel from Legacy Image at c2000000 ... Image Name: Linux-2.6.33-rc4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2302088 Bytes = 2.2 MB Load Address: c0008000 Entry Point: c0008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.33-rc4 (duyky@duyky-ubuntu) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #8 PREEMPT Tue May 1 21:21:37 PDT 2012 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: DaVinci DA850/OMAP-L138/AM18xx EVM Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 32768 free_area_init_node: node 0, pgdat c04a38b0, node_mem_map c04c7000 DMA zone: 256 pages used for memmap DMA zone: 0 pages reserved DMA zone: 32512 pages, LIFO batch:7 DaVinci da850/omap-l138/am18xx variant 0x1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: root=/dev/mtdblock4 rootfstype=jffs2 rw ttyS2,115200n8 mtdparts=nand0:128K(u-env),1920K(u-boot),4M(kernel),-(jf fs2) PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 124912KB available (4360K code, 324K data, 164K init, 0K highmem) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:245 Console: colour dummy device 80x30 Calibrating delay loop... 149.50 BogoMIPS (lpj=747520) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok DaVinci: 144 gpio irqs regulator: core version 0.5 NET: Registered protocol family 16 bio: create slab at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb regulator: VDCDC1: 3200 <--> 3300 mV at 3300 mV regulator: VDCDC2: 1750 <--> 3300 mV at 3300 mV regulator: VDCDC3: 950 <--> 1375 mV at 1200 mV regulator: LDO1: 1800 mV regulator: LDO2: 1150 <--> 1300 mV at 1200 mV i2c-gpio i2c-gpio.1: using pins 20 (SDA) and 21 (SCL) vpif vpif: vpif probe success Switching to clocksource timer0_1 musb_hdrc: version 6.0, cppi4.1-dma, otg (peripheral+host), debug=0 Waiting for USB PHY clock good... musb_hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn) musb_hdrc: MHDRC RTL version 1.800 musb_hdrc: setup fifo_mode 2 musb_hdrc: 8/9 max ep, 3904/4096 memory musb_hdrc: USB OTG mode controller at fee00000 using DMA, IRQ 58 musb_hdrc musb_hdrc: MUSB HDRC host driver musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. EMAC: MII PHY configured, RMII PHY will not be functional JFFS2 version 2.2. (NAND) B) 2001-2006 Red Hat, Inc. msgmni has been set to 244 io scheduler noop registered (default) da8xx_lcdc da8xx_lcdc.0: GLCD: Found Sharp_LK043T1DG01 panel Console: switching to colour frame buffer device 60x34 Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A console [ttyS2] enabled brd: module loaded loop: module loaded ahci ahci: version 3.0 ahci ahci: forcing PORTS_IMPL to 0x1 ahci ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc scsi0 : ahci ata1: SATA max UDMA/133 irq 67 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 885 at 0x000006ea0000 Bad block table written to 0x000007fe0000, version 0x01 Bad block table written to 0x000007fc0000, version 0x01 Creating 5 MTD partitions on "davinci_nand.1": 0x000000000000-0x000000020000 : "u-boot env" 0x000000020000-0x000000040000 : "UBL" 0x000000040000-0x0000000c0000 : "u-boot" 0x000000200000-0x000000600000 : "kernel" 0x000000600000-0x000007fc0000 : "filesystem" davinci_nand davinci_nand.1: controller rev. 2.5 console [netcon0] enabled netconsole: network logging started ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci ohci.0: DA8xx OHCI ohci ohci.0: new USB bus registered, assigned bus number 2 ohci ohci.0: irq 59, io mem 0x01e25000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. g_ether gadget: using random self ethernet address g_ether gadget: using random host ethernet address usb0: MAC 5e:85:83:11:8d:1e usb0: HOST MAC ae:37:15:ca:24:4a g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready musb_hdrc musb_hdrc: MUSB HDRC host driver musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0 omap_rtc: RTC power up reset detected i2c /dev entries driver Linux video capture interface: v2.00 tvp514x 1-005d: tvp514x 1-005d decoder driver registered !! vpif_capture vpif_capture: registered sub device tvp514x-0 tvp514x 1-005c: tvp514x 1-005c decoder driver registered !! vpif_capture vpif_capture: registered sub device tvp514x-1 vpif_capture vpif_capture: VPIF Capture driver initialized usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) watchdog watchdog: heartbeat 60 sec cpuidle: using governor ladder cpuidle: using governor menu davinci_mmc davinci_mmc.0: Using DMA, 4-bit mode hub 3-0:1.0: activate --> -22 ata1: SATA link down (SStatus 0 SControl 300) Registered led device: led1 Registered led device: led2 usbcore: registered new interface driver usbhid usbhid: USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.21. usbcore: registered new interface driver snd-usb-audio No device for DAI tlv320aic3x asoc: tlv320aic3x <-> davinci-i2s mapping ok ALSA device list: #0: DA850/OMAP-L138 EVM (tlv320aic3x) TCP cubic registered NET: Registered protocol family 17 Clocks: disable unused emac Clocks: disable unused spi1 regulator_init_complete: incomplete constraints, leaving LDO2 on regulator_init_complete: incomplete constraints, leaving LDO1 on regulator_init_complete: incomplete constraints, leaving VDCDC3 on regulator_init_complete: incomplete constraints, leaving VDCDC2 on regulator_init_complete: incomplete constraints, leaving VDCDC1 on //>> Random MAC addr : >> MAC_ADDR 00 00 00 00 00 00 emac-mii: probed //>> davinci_emac_probe : >> MAC_ADDR 00 12 34 56 78 91 omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) Empty flash at 0x0000fffc ends at 0x00010000 Empty flash at 0x0002ffd0 ends at 0x00030000 Empty flash at 0x0008fffc ends at 0x00090000 mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new high speed SD card at address 0002 mmcblk0: mmc0:0002 00000 971 MiB mmcblk0: Empty flash at 0x000afffc ends at 0x000b0000 p1 Empty flash at 0x000cffd0 ends at 0x000d0000 Empty flash at 0x000efffc ends at 0x000f0000 Empty flash at 0x0010fffc ends at 0x00110000 Empty flash at 0x0012fffc ends at 0x00130000 Empty flash at 0x0014fffc ends at 0x00150000 Empty flash at 0x0018fffc ends at 0x00190000 Empty flash at 0x001afffc ends at 0x001b0000 Empty flash at 0x001cfffc ends at 0x001d0000 Empty flash at 0x001efffc ends at 0x001f0000 Empty flash at 0x0020fffc ends at 0x00210000 Empty flash at 0x0022fffc ends at 0x00230000 Empty flash at 0x0024fffc ends at 0x00250000 Empty flash at 0x0026fffc ends at 0x00270000 Empty flash at 0x0028ff60 ends at 0x00290000 Empty flash at 0x002afffc ends at 0x002b0000 Empty flash at 0x002cfffc ends at 0x002d0000 Empty flash at 0x002efffc ends at 0x002f0000 Empty flash at 0x0030ff94 ends at 0x00310000 Empty flash at 0x0032fffc ends at 0x00330000 Empty flash at 0x0034fffc ends at 0x00350000 Empty flash at 0x0036fffc ends at 0x00370000 Empty flash at 0x0038ffd4 ends at 0x00390000 Empty flash at 0x003afffc ends at 0x003b0000 Empty flash at 0x003cfffc ends at 0x003d0000 Empty flash at 0x003efffc ends at 0x003f0000 Empty flash at 0x0042ff98 ends at 0x00430000 Empty flash at 0x0044fffc ends at 0x00450000 Empty flash at 0x0046fffc ends at 0x00470000 Empty flash at 0x00479954 ends at 0x0047a000 Empty flash at 0x0491c458 ends at 0x0491c800 VFS: Mounted root (jffs2 filesystem) on device 31:4. Freeing init memory: 164K INIT: version 2.86 booting Starting udevudevd version 124 started uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock2, sector 0 Buffer I/O error on device mtdblock2, logical block 0 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock2, sector 8 Buffer I/O error on device mtdblock2, logical block 1 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock2, sector 16 Buffer I/O error on device mtdblock2, logical block 2 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock2, sector 24 Buffer I/O error on device mtdblock2, logical block 3 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock2, sector 0 Buffer I/O error on device mtdblock2, logical block 0 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock0, sector 8 Buffer I/O error on device mtdblock0, logical block 1 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock0, sector 16 Buffer I/O error on device mtdblock0, logical block 2 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock0, sector 24 Buffer I/O error on device mtdblock0, logical block 3 Remounting root file system... uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock1, sector 0 Buffer I/O error on device mtdblock1, logical block 0 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock1, sector 8 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock1, sector 16 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock1, sector 24 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock0, sector 0 uncorrectable error : uncorrectable error : end_request: I/O error, dev mtdblock1, sector 0 EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended Setting up IP spoofing protection: rp_filter. Configuring network interfaces... udhcpc (v1.13.2) started Sending discover... Sending select for 10.1.1.14... Lease of 10.1.1.14 obtained, lease time 86400 adding dns 10.1.1.1 done. JFFS2 notice: (1110) check_node_data: wrong data CRC in data node at 0x0491bc7c: read 0x3aad8b1f, calculated 0xe8b927bc. Tue Apr 14 20:24:00 UTC 2009 INIT: Entering runlevel: 5 Starting telnet daemon. Starting syslogd/klogd: done .-------. | | .-. | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution 2011.09 sbc8018 ttyS2 sbc8018 login: root root@sbc8018:~#