Tiny6410 > run nfs.boot dm9000 i/o: 0x18000300, id: 0x90000a46 DM9000: running in 16 bit mode MAC: 00:12:34:56:78:93 operating at 100M full duplex mode TFTP from server 10.1.1.5; our IP address is 10.1.1.123 Filename '_zImg_SD'. Load address: 0xc0008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############## done Bytes transferred = 3066184 (2ec948 hex) Boot with zImage Starting kernel ... Uncompressing Linux... done, booting the kernel. Initializing cgroup subsys cpu Linux version 2.6.38 (duyky@duyky-ubuntu) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #3 PREEMPT Sun May 6 09:43:20 PDT 2012 CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: MINI6410 debug: ignoring loglevel setting. Memory policy: ECC disabled, Data cache writeback CPU S3C6410 (id 0x36410101) s3c6410_init_clocks: initialising clocks S3C24XX Clocks, Copyright 2004 Simtec Electronics camera: no parent clock specified s3c6400_setup_clocks: registering clocks s3c6400_setup_clocks: clkdiv0 = 01043310 s3c6400_setup_clocks: xtal is 12000000 S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000 S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000 mout_apll: source is fout_apll (1), rate is 532000000 mout_epll: source is epll (1), rate is 24000000 mout_mpll: source is mpll (1), rate is 532000000 mmc_bus: source is mout_epll (0), rate is 24000000 mmc_bus: source is mout_epll (0), rate is 24000000 mmc_bus: source is mout_epll (0), rate is 24000000 usb-bus-host: source is clk_48m (0), rate is 48000000 s3c64xx_clk_doutmpll_get_rate: parent is 532000000 uclk1: source is dout_mpll (1), rate is 66500000 spi-bus: source is mout_epll (0), rate is 24000000 spi-bus: source is mout_epll (0), rate is 24000000 audio-bus: source is mout_epll (0), rate is 24000000 audio-bus: source is mout_epll (0), rate is 24000000 audio-bus: source is mout_epll (0), rate is 24000000 irda-bus: source is mout_epll (0), rate is 24000000 camera: no parent clock specified s3c64xx: 10485760 bytes SDRAM reserved for fimc at 0x5f5f8000 s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x5edf8000 s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x5e5f8000 s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x5dff8000 s3c64xx: 4194304 bytes SDRAM reserved for jpeg at 0x5dbf8000 On node 0 totalpages: 65536 free_area_init_node: node 0, pgdat c0624c6c, node_mem_map c0666000 Normal zone: 512 pages used for memmap Normal zone: 0 pages reserved Normal zone: 65024 pages, LIFO batch:15 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttySAC0,115200 root=/dev/nfs rw nfsroot=10.1.1.5:/home/duyky/_NFS/_RFS,wsize=1500,rsize=1500 ip=dhcp ig nore_loglevel PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 256MB = 256MB total Memory: 216416k/216416k available, 45728k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xff000000 - 0xffe00000 ( 14 MB) vmalloc : 0xd0800000 - 0xf6000000 ( 600 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc002d000 ( 148 kB) .text : 0xc002d000 - 0xc05ded3c (5832 kB) .data : 0xc05e0000 - 0xc0625380 ( 277 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:246 s3c64xx_init_irq: initialising interrupts VIC @f6000000: id 0x00041192, vendor 0x41 VIC @f6010000: id 0x00041192, vendor 0x41 timer tcon=00580000, tcnt 1b0f0, tcfg 00000201,00010000, usec 00001719 Console: colour dummy device 80x30 console [ttySAC0] enabled Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 s3c64xx_dma_init: Registering DMA channels PL080: IRQ 73, at d0808000, channels 0..8 PL080: IRQ 74, at d080c000, channels 8..16 S3C6410: Initialising architecture bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb s3c-i2c s3c2440-i2c: slave address 0x10 s3c-i2c s3c2440-i2c: bus frequency set to 64 KHz s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter Advanced Linux Sound Architecture Driver Version 1.0.23. NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 128 (order: 0, 6144 bytes) UDP-Lite hash table entries: 128 (order: 0, 6144 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) squashfs: version 4.0 (2009/01/31) Phillip Lougher yaffs: yaffs built May 4 2012 20:32:07 Installing. msgmni has been set to 422 io scheduler noop registered (default) io scheduler cfq registered S3C_LCD clock got enabled :: 133.000 Mhz LCD TYPE :: N43 will be initialized Window[0] - FB1: map_video_memory: clear ff000000:0007f800 FB1: map_video_memory: dma=5d580000 cpu=ff000000 size=0007f800 Window[0] - FB2: map_video_memory: clear ff03fc00:0003fc00 FB2: map_video_memory: dma=5d5bfc00 cpu=ff03fc00 size=0003fc00 Console: switching to colour frame buffer device 60x34 fb0: s3cfb frame buffer device Window[1] - FB1: map_video_memory: clear ff080000:0007f800 FB1: map_video_memory: dma=5d600000 cpu=ff080000 size=0007f800 Window[1] - FB2: map_video_memory: clear ff0bfc00:0003fc00 FB2: map_video_memory: dma=5d63fc00 cpu=ff0bfc00 size=0003fc00 fb1: s3cfb frame buffer device Window[2] - FB1: map_video_memory: clear ff100000:0003fc00 FB1: map_video_memory: dma=5d680000 cpu=ff100000 size=0003fc00 fb2: s3cfb frame buffer device Window[3] - FB1: map_video_memory: clear ff140000:0003fc00 FB1: map_video_memory: dma=5d6c0000 cpu=ff140000 size=0003fc00 fb3: s3cfb frame buffer device backlight initialized s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10 s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10 s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10 s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10 leds initialized buttons initialized pwm initialized adc initialized loop: module loaded S3C NAND Driver, (c) 2008 Samsung Electronics MLC nand initialized, 2011 ported by FriendlyARM S3C NAND Driver is using hardware ECC. NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit) Creating 3 MTD partitions on "NAND 2GiB 3,3V 8-bit": 0x000000000000-0x000000400000 : "Bootloader" 0x000000400000-0x000000c00000 : "Kernel" 0x000000c00000-0x000080000000 : "File System" PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 dm9000 Ethernet Driver, V1.31 eth0: dm9000a at d081e000,d0c00004 IRQ 108 MAC: 00:12:34:56:78:93 (chip) ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 s3c2410-ohci s3c2410-ohci: s3c2410_start_hc: s3c2410-ohci s3c2410-ohci: S3C24XX OHCI drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000 s3c2410-ohci s3c2410-ohci: created debug files s3c2410-ohci s3c2410-ohci: OHCI controller state s3c2410-ohci s3c2410-ohci: OHCI 1.0, NO legacy support registers s3c2410-ohci s3c2410-ohci: control 0x083 HCFS=operational CBSR=3 s3c2410-ohci s3c2410-ohci: cmdstatus 0x00000 SOC=0 s3c2410-ohci s3c2410-ohci: intrstatus 0x00000004 SF s3c2410-ohci s3c2410-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH s3c2410-ohci s3c2410-ohci: hcca frame #001e s3c2410-ohci s3c2410-ohci: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2) s3c2410-ohci s3c2410-ohci: roothub.b 00000000 PPCM=0000 DR=0000 s3c2410-ohci s3c2410-ohci: roothub.status 00008000 DRWE s3c2410-ohci s3c2410-ohci: roothub.portstatus [0] 0x00010101 CSC PPS CCS s3c2410-ohci s3c2410-ohci: roothub.portstatus [1] 0x00000100 PPS usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: S3C24XX OHCI usb usb1: Manufacturer: Linux 2.6.38 ohci_hcd usb usb1: SerialNumber: s3c24xx usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa006,0x2900,0x0000,cd42dbc8,000f) hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: no over-current protection hub 1-0:1.0: power on to power good time: 4ms s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa000,0x0000,0x0000,cd42db78,0004) hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0x2303,0x0008,0x0001,cd42db50,0000) s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0x2303,0x0008,0x0002,cd42db50,0000) drivers/usb/core/inode.c: creating file '001' usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems USB Serial support registered for aircable usbcore: registered new interface driver aircable USB Serial support registered for ark3116 usbcore: registered new interface driver ark3116 ark3116:v0.6:USB ARK3116 serial/IrDA driver USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter usbcore: registered new interface driver belkin belkin_sa: v1.3:USB Belkin Serial converter driver USB Serial support registered for ch341-uart usbcore: registered new interface driver ch341 USB Serial support registered for cp210x usbcore: registered new interface driver cp210x cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver USB Serial support registered for Reiner SCT Cyberjack USB card reader s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0001,cd4bfe18,0004) usbcore: registered new interface driver cyberjack cyberjack: v1.01 Matthias Bruestle s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS hub 1-0:1.0: port 1: status 0101 change 0001 cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver USB Serial support registered for DeLorme Earthmate USB s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0x2301,0x0010,0x0001,cd4bfe48,0000) USB Serial support registered for HID->COM RS232 Adapter USB Serial support registered for Nokia CA-42 V2 Adapter s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0002,cd4bfe18,0004) usbcore: registered new interface driver cypress cypress_m8: v1.10:Cypress USB to Serial Driver USB Serial support registered for debug usbcore: registered new interface driver debug USB Serial support registered for Digi 2 port USB adapter USB Serial support registered for Digi 4 port USB adapter usbcore: registered new interface driver digi_acceleport digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver USB Serial support registered for Edgeport 2 port adapter USB Serial support registered for Edgeport 4 port adapter USB Serial support registered for Edgeport 8 port adapter USB Serial support registered for EPiC device usbcore: registered new interface driver io_edgeport io_edgeport: v2.7:Edgeport USB Serial Driver USB Serial support registered for Edgeport TI 1 port adapter USB Serial support registered for Edgeport TI 2 port adapter usbcore: registered new interface driver io_ti io_ti: v0.7mode043006:Edgeport USB Serial Driver USB Serial support registered for empeg usbcore: registered new interface driver empeg hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0001,cd463e28,0004) hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s empeg: v1.3:USB Empeg Mark I/II Driver USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0x2303,0x0004,0x0001,cd463dc8,0000) ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver USB Serial support registered for funsoft usbcore: registered new interface driver funsoft USB Serial support registered for Garmin GPS usb/tty usbcore: registered new interface driver garmin_gps garmin_gps: v0.33:garmin gps driver USB Serial support registered for hp4X usbcore: registered new interface driver hp4X hp4x: v1.00:HP4x (48/49) Generic Serial driver USB Serial support registered for PocketPC PDA usbcore: registered new interface driver ipaq ipaq: v1.0:USB PocketPC PDA driver USB Serial support registered for IPWireless converter usbcore: registered new interface driver ipwtty ipw: v0.4:IPWireless tty driver USB Serial support registered for IR Dongle usbcore: registered new interface driver ir-usb ir_usb: v0.5:USB IR Dongle driver USB Serial support registered for iuu_phoenix usbcore: registered new interface driver iuu_phoenix iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver USB Serial support registered for Keyspan - (without firmware) s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0001,cd463d98,0004) USB Serial support registered for Keyspan 1 port adapter USB Serial support registered for Keyspan 2 port adapter s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS USB Serial support registered for Keyspan 4 port adapter usbcore: registered new interface driver keyspan keyspan: v1.1.5:Keyspan USB to Serial Converter Driver USB Serial support registered for Keyspan PDA USB Serial support registered for Keyspan PDA - (prerenumeration) USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) usbcore: registered new interface driver keyspan_pda keyspan_pda: v1.1:USB Keyspan PDA Converter driver USB Serial support registered for KL5KUSB105D / PalmConnect usbcore: registered new interface driver kl5kusb105d kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0x2301,0x0014,0x0001,cd463dc8,0000) usb 1-1: new full speed USB device using s3c2410-ohci and address 2 USB Serial support registered for KOBIL USB smart card terminal s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0x2303,0x0004,0x0001,cd463dc8,0000) usbcore: registered new interface driver kobil kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental) USB Serial support registered for MCT U232 usbcore: registered new interface driver mct_u232 mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver USB Serial support registered for Moschip 2 port adapter mos7720: 2.1:Moschip USB Serial Driver usbcore: registered new interface driver moschip7720 USB Serial support registered for Moschip 7840/7820 USB Serial Driver mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver usbcore: registered new interface driver mos7840 USB Serial support registered for moto-modem usbcore: registered new interface driver moto-modem USB Serial support registered for navman usbcore: registered new interface driver navman USB Serial support registered for ZyXEL - omni.net lcd plus usb usbcore: registered new interface driver omninet s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0001,cd463d98,0004) s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver USB Serial support registered for opticon usbcore: registered new interface driver opticon USB Serial support registered for oti6858 usbcore: registered new interface driver oti6858 USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver USB Serial support registered for qcaux usbcore: registered new interface driver qcaux USB Serial support registered for Qualcomm USB modem usbcore: registered new interface driver qcserial safe_serial: v0.1:USB Safe Encapsulated Serial USB Serial support registered for safe_serial usbcore: registered new interface driver safe_serial s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0x2301,0x0014,0x0001,cd463dc8,0000) USB Serial support registered for sam-ba usbcore: registered new interface driver sam-ba sam_ba: v1.0: Atmel SAM Boot Assistant (SAM-BA) driver USB Serial support registered for siemens_mpi usbcore: registered new interface driver siemens_mpi Driver for Siemens USB/MPI adapter usb 1-1: ep0 maxpacket = 8 Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net USB Serial support registered for Sierra USB modem usbcore: registered new interface driver sierra sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems usb 1-1: default language 0x0409 USB Serial support registered for SPCP8x5 usbcore: registered new interface driver spcp8x5 usb 1-1: udev 2, busnum 1, minor = 1 usb 1-1: New USB device found, idVendor=05e3, idProduct=0606 spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Hub 2.0 usb 1-1: usb_probe_device USB Serial support registered for Quatech SSU-100 USB to Serial Driver usbcore: registered new interface driver ssu100 usb 1-1: configuration #1 chosen from 1 choice ssu100: v0.1:Quatech SSU-100 USB to Serial Driver usb 1-1: adding 1-1:1.0 (config #1, interface 0) USB Serial support registered for symbol usbcore: registered new interface driver symbol hub 1-1:1.0: usb_probe_interface hub 1-1:1.0: usb_probe_interface - got id hub 1-1:1.0: USB hub found USB Serial support registered for TI USB 3410 1 port adapter USB Serial support registered for TI USB 5052 2 port adapter hub 1-1:1.0: 4 ports detected hub 1-1:1.0: standalone hub hub 1-1:1.0: individual port power switching usbcore: registered new interface driver ti_usb_3410_5052 ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver hub 1-1:1.0: individual port over-current protection hub 1-1:1.0: power on to power good time: 44ms USB Serial support registered for Handspring Visor / Palm OS USB Serial support registered for Sony Clie 3.5 USB Serial support registered for Sony Clie 5.0 hub 1-1:1.0: local power source is good hub 1-1:1.0: enabling power on all ports usbcore: registered new interface driver visor visor: USB HandSpring Visor / Palm OS driver USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) USB Serial support registered for Connect Tech - WhiteHEAT usbcore: registered new interface driver whiteheat whiteheat: v2.0:USB ConnectTech WhiteHEAT driver USB Serial support registered for vivopay-serial usbcore: registered new interface driver vivopay-serial vivopay_serial: v1.0:ViVOpay USB Serial Driver USB Serial support registered for zio usbcore: registered new interface driver zio drivers/usb/core/inode.c: creating file '002' hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0001,cd463e28,0004) Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. s3c-hsotg s3c-hsotg: regs d0840000, irq 90 s3c-hsotg s3c-hsotg: s3c_hsotg_corereset: reset failed, GRSTCTL=80000001 hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004 s3c-hsotg s3c-hsotg: GRXFSIZ=0x00001800, GNPTXFSIZ=0x18001800 s3c-hsotg s3c-hsotg: shared fifos s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0002,cd463e28,0004) s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS s3c-hsotg s3c-hsotg: cannot create debug root s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0x2301,0x0010,0x0002,cd463e58,0000) hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s s3c-hsotg s3c-hsotg: DCFG=0x00200000, DCTL=0x00000002, DIEPMSK=0000000f s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0002,cd463e28,0004) s3c-hsotg s3c-hsotg: GAHBCFG=0x00000000, 0x44=0x00000000 s3c-hsotg s3c-hsotg: GRXFSIZ=0x00000800, GNPTXFSIZ=0x04000800 s3c-hsotg s3c-hsotg: DPTx[1] FSize=768, StAddr=0x00000f00 s3c-hsotg s3c-hsotg: DPTx[2] FSize=768, StAddr=0x00001200 s3c-hsotg s3c-hsotg: DPTx[3] FSize=768, StAddr=0x00001500 s3c-hsotg s3c-hsotg: DPTx[4] FSize=768, StAddr=0x00001800 s3c-hsotg s3c-hsotg: DPTx[5] FSize=768, StAddr=0x00001b00 s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0002,cd463e28,0004) s3c-hsotg s3c-hsotg: DPTx[6] FSize=768, StAddr=0x00001e00 s3c-hsotg s3c-hsotg: DPTx[7] FSize=768, StAddr=0x00002100 s3c-hsotg s3c-hsotg: DPTx[8] FSize=768, StAddr=0x00002400 s3c-hsotg s3c-hsotg: DPTx[9] FSize=768, StAddr=0x00002700 s3c-hsotg s3c-hsotg: DPTx[10] FSize=768, StAddr=0x00002a00 s3c-hsotg s3c-hsotg: DPTx[11] FSize=768, StAddr=0x00002d00 s3c-hsotg s3c-hsotg: DPTx[12] FSize=768, StAddr=0x00003000 s3c-hsotg s3c-hsotg: DPTx[13] FSize=768, StAddr=0x00003300 s3c-hsotg s3c-hsotg: DPTx[14] FSize=768, StAddr=0x00003600 s3c-hsotg s3c-hsotg: DPTx[15] FSize=768, StAddr=0x00003900 s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0002,cd463e28,0004) s3c-hsotg s3c-hsotg: ep0-in: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep0-out: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep1-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep1-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep2-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep2-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep3-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0002,cd463e28,0004) s3c-hsotg s3c-hsotg: ep3-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep4-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep4-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep5-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep5-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(cd70ac00,0xa300,0x0000,0x0002,cd463e28,0004) s3c-hsotg s3c-hsotg: ep6-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep6-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 s3c-hsotg s3c-hsotg: ep7-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep7-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000 s3c-hsotg s3c-hsotg: ep8-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep8-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep9-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep9-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep10-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep10-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep11-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep11-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep12-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep12-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep13-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep13-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep14-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: ep14-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 s3c-hsotg s3c-hsotg: DVBUSDIS=0x000017d7, DVBUSPULSE=000005b8 mousedev: PS/2 mouse device common for all mice S3C Touchscreen driver, (c) 2010 FriendlyARM touchscreen got loaded successfully : 12 bits touchscreen-1wire initialized backlight-1wire initialized input: TouchScreen Pipe as /devices/virtual/input/input0 ts-if initialized S3C24XX RTC, (c) 2004,2006 Simtec Electronics one_wire_status: 4 s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver Linux video capture interface: v2.00 i2c-core: driver [tuner] using legacy suspend method i2c-core: driver [tuner] using legacy resume method i2c-core: driver [msp3400] using legacy suspend method i2c-core: driver [msp3400] using legacy resume method usbcore: registered new interface driver usbvision USBVision USB Video Device Driver for Linux : 0.9.10 usbcore: registered new interface driver pvrusb2 pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner pvrusb2: Debug mask is 31 (0x1f) usbcore: registered new interface driver zr364xx one_wire_status: 4 zr364xx: Zoran 364xx usbcore: registered new interface driver stkwebcam pwc: Philips webcam module version 10.0.14 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. one_wire_status: 2 usbcore: registered new interface driver Philips webcam gspca: v2.12.0 registered usbcore: registered new interface driver benq usbcore: registered new interface driver conex usbcore: registered new interface driver cpia1 one_wire_status: 4 usbcore: registered new interface driver etoms usbcore: registered new interface driver finepix usbcore: registered new interface driver jeilinj usbcore: registered new interface driver konica usbcore: registered new interface driver mars usbcore: registered new interface driver mr97310a usbcore: registered new interface driver ov519 usbcore: registered new interface driver ov534 usbcore: registered new interface driver ov534_9 one_wire_status: 4 usbcore: registered new interface driver pac207 usbcore: registered new interface driver pac7302 usbcore: registered new interface driver pac7311 usbcore: registered new interface driver sn9c2028 usbcore: registered new interface driver sn9c20x usbcore: registered new interface driver sonixb usbcore: registered new interface driver sonixj usbcore: registered new interface driver spca500 usbcore: registered new interface driver spca501 one_wire_status: 4 usbcore: registered new interface driver spca505 usbcore: registered new interface driver spca506 spca506: registered usbcore: registered new interface driver spca508 usbcore: registered new interface driver spca561 usbcore: registered new interface driver spca1528 usbcore: registered new interface driver sq905 usbcore: registered new interface driver sq905c usbcore: registered new interface driver sq930x one_wire_status: 4 usbcore: registered new interface driver sunplus usbcore: registered new interface driver stk014 usbcore: registered new interface driver stv0680 usbcore: registered new interface driver t613 usbcore: registered new interface driver tv8532 usbcore: registered new interface driver vc032x usbcore: registered new interface driver xirlink-cit usbcore: registered new interface driver zc3xx usbcore: registered new interface driver ALi m5602 one_wire_status: 4 usbcore: registered new interface driver STV06xx gspca_gl860: driver startup - version 0.9d10 usbcore: registered new interface driver gspca_gl860 usbcore: registered new interface driver hdpvr usbcore: registered new interface driver s2255 s3c-fimc: controller 0 registered successfully s3c-fimc: controller 1 registered successfully FIMC Driver, 2010 ported by FriendlyARM http://www.arm9.net ov965x: probe s3c-fimc: i2c transfer error s3c-fimc: i2c transfer error s3c-fimc: i2c transfer error s3c-fimc: i2c transfer error s3c-fimc: ov965x: Product ID fb:fb Manufacturer ID fb:fb parent clock for camera: 266.000 MHz, divisor: 11 [CAM]RESET CAM. one_wire_status: 3 S3C6400 MFC Driver, (c) 2007 Samsung Electronics, 2010 ported by FriendlyARM http://www.arm9.net S3C6400 MFC Driver init OK. S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics S3C6410 TV encoder Driver init OK. S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics S3C6410 TV scaler Driver init OK. S3C Rotator Driver, (c) 2008 Samsung Electronics s3c_rotator_probe called one_wire_status: 4 s3c_rotator_probe success S3C JPEG Driver, (c) 2007 Samsung Electronics s3c_g2d_probe called s3c_g2d_probe Success S3C G2D Init : Done S3C G3D Driver, (c) 2007-2009 Samsung Electronics s3c_g3d version : 0x1050000 S3C G3D Init : Done usbcore: registered new interface driver uvcvideo USB Video Class driver (v1.0.0) S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled one_wire_status: 4 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz) s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz) s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz) Registered led device: mmc0:: mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz) one_wire_status: 4 s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz) s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (24000000 Hz) Registered led device: mmc1:: mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver mmc0: new high speed SD card at address e624 mmcblk0: mmc0:e624 SU02G 1.84 GiB mmcblk0: p1 p2 asoc: wm9713-hifi <-> samsung-ac97 mapping ok ALSA device list: #0: MINI6410 TCP cubic registered NET: Registered protocol family 17 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:02:02 UTC (946684922) eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 Sending DHCP requests ., OK IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.1.1.34 IP-Config: Complete: device=eth0, addr=10.1.1.34, mask=255.255.255.0, gw=10.1.1.1, host=10.1.1.34, domain=, nis-domain=(none), bootserver=0.0.0.0, rootserver=10.1.1.5, rootpath= one_wire_status: 5 VFS: Mounted root (nfs filesystem) on device 0:12. Freeing init memory: 148K << Start rcS for System Start-Up>> Start ntpd to get / set time Start inetd Start httpd Start telnetd << Done rcS >> Please press Enter to activate this console. << Start Shell Profile >> Wed May 16 21:36:49 PST 2012 << Done profile >> arm_34:/home % date Wed May 16 21:36:53 PST 2012 arm_34:/home %